b)
Do not use the appliance in an explosive area, for example in the presence of
flammable liquids, gases or dust. The appliance produces sparks that can ignite
dust or fumes.
c)
If you have any doubts as to whether the unit is working properly or if it is
damaged, contact the manufacturer's service department.
d)
Only the manufacturer's service department may repair the unit. Do not carry
out repairs yourself!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
h)
Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
i)
Keep the packaging and small assembly parts out of the reach of children.
j)
When using this unit together with other units, also follow the other
instructions for use.
1.3.
Personal safety
a)
Do not operate this unit if you are tired, ill or under the influence of alcohol,
drugs or medication that could impair your ability to operate the unit.
b)
Use caution and common sense when operating this appliance. A moment's
inattention during operation may result in serious personal injury.
c)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
d)
Do not overestimate your capabilities. Maintain body balance and equilibrium
at all times during operation. This allows for better control of the machine in
unexpected situations.
1.4.
Safe use of the unit
a)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
c)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
d)
Do not move, shift, or rotate the machine while in operation.
