3.3.
Working with the unit
After connecting to the proper power source, turn the device on using the switch
(B) located on one of the device sides.
You can also change the lighting mode using the same switch:
Position "O" -
backlight off.
Position "I" -
intense blue light
(apart from visual effects it has a positive impact
on the rooting and tillering of aquarium plants)
Position "II" -
mixed daylight
(predominantly neutral white with accents of blue,
violet, green and red - in addition to visual effects it impacts the mood and vitality
of aquarium fauna)
3.4.
Cleaning and maintenance
a)
Cleaning and maintenance
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Do not spray the unit with a stream of water or immerse it in water.
d)
Make sure that no water enters through the ventilation openings in the casing.
e)
Clean the ventilation openings with a brush and compressed air.
f)
Use a soft cloth for cleaning.
