Hillstone SG-6000 E Series Скачать руководство пользователя страница 21

Страница: 21 / 68

Chapter 1 Introduction

Hillstone

Hillstone SG-6000 E-Series Hardware Reference Guide

Orange/Always

The trial license has expired and there is no

legitimate license installed in the system.

Off

The system is running normally.

PS0

Green/Always
on

Power Supply PS0 is running normally.

Orange/Always
on

Power Supply PS0 is running normally, but its fan
has failed. Change the power supply immediately.

Off

Power Supply PS0 is powered off or has failed.

PS1

Green/Always
on

Power Supply PS1 is running normally.

Orange/Always
on

Power Supply PS1 is running normally, but its fan
has failed. Change the power supply immediately.

Off

Power Supply PS1 is powered off or has failed.

Green/Always
on

Not using HA, this device is the master device.

Green/Blinking

Two devices are in an HA cluster. This device is
working as the master.

Orange/Blinking

Two devices are in an HA cluster. This device is
working as the slave.

Red/Blinking

HA function has failed.

Off

High Availability is disabled.

FAN

Green/Always
on

The cooling system is running normally.

Orange/Always

One of the fans has failed, but the cooling system
can still fully function. Change the fan tray as soon
as possible.

Red/Always on

The cooling system has a serious error or the fan
tray is not fully inserted. The system will

automatically shut down in 15 seconds.

LNK

Green/Always

The link between this port and its peer device is in

normal status.

Off

The link between this port and its peer device has
failed.

ACT

Orange/Blinking The port is sending or receiving data.
Off

No data is transmitted on this port.

e0/0-
e0/8

Green/Always
on

The link between this port and its peer device is in
normal status.

Green/Blinking

The port is sending or receiving data.

Off

There is no connection between this port and its peer

device, or the link between this port and its peer
device fails.

WLAN

Green/Always
on

The device discovers the built-in WLAN module.

Green/Blinking

The WLAN module is sending or receiving data.

Green/Always
on

The device discovers the built-in 4G Express module.

Green/Blinking

The 4G module is sending or receiving data.

Содержание SG-6000 E Series





































































Результаты поиска

Содержание SG-6000 E Series

Отзывы:

Похожие инструкции для SG-6000 E Series

Бренды по названию

Популярные бренды

Hillstone SG-6000 E Series, Справочник по аппаратуре

Результаты поиска

Содержание SG-6000 E Series

Отзывы:

Похожие инструкции для SG-6000 E Series

Бренды по названию

Популярные бренды