7
Assembly
Handle Assembly
1.
Ensure that the bolts and nuts on the
handle case have not worked loose during
transportation.
Re-tighten if needed.
2.
The handle must be assembled before
use of the Hoist.
Remove the screw from the handle cover.
Remove the cover and fit the handle as
shown (
Fig. 8
).
Insert and tighten the screw to secure
assembly.
3.
Raise the head of the Hoist at least six full
turns so that it is free to rotate.
Note:
Never leave the Hoist with the cross
and wind brake engaged. Use the brake only
when you are pegging out the washing and
Note:
Stop turning the handle when winding
down the hoist if you feel resistance. Do not
continue to turn the handle if it is not easily free
to rotate.
Fig. 8
Oil hole
