6
Drill 2 holes using
masonry drill
Product centreline
30mm
Mount hole centres
Top of
product
Product centr
eline
Step 3 – Mounting your cabinet to a wall
3.1 Prepare your cabinet location
Determine the best location for the installation of your product (refer to page 4).
Mark out a centre line for your product within your allocated site.
3.2
Ensure that either side of this centreline and the area where the cabinet is to be
installed on the wall is free from pipes and other obstructions (
Fig. 1
).
3.3
Mark the cabinet mount centres on the wall at the desired installation height
(refer to page 5 and the table below).
Centres
(mm)
Centres
(inch)
705
27¾
Fig. 1
Installation
3.4 Drill holes in wall
Masonry fasteners are
not
included with this product. When attaching to a sound
masonry wall, we recommend using masonry sleeve (hex head) anchors (diameter
8mm x 45mm).
3.5
If you are using these fasteners, drill a ø8mm (5/16") hole using a masonry
drill (
Fig 2
).
Note:
If you are mounting to a different wall type, consult your hardware store for
advice on the appropriate fasteners to use.
Fig. 2
Mount
centres
Ensure surrounding
area is free from
obstructions
‘Mount Hole Centres’
2.0m
(6'6")
to
6.5m
(21’4")
PD4205c Everyday Retracting Product Manual.indd 6
4/11/11 11:24 AM
