Hillco 3700S Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 40

Hillco 3700S Скачать руководство пользователя страница 8

8

S

AFETY

SAFETY

ALERT

SYMBOL

This Safety Alert symbol means

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

The Safety Alert symbol identifies important safety messages on the

Hillco 3700S Leveling System and in the manual. When you see this

symbol, be alert to the possibility of personal injury or death.

Follow the instructions in the safety message.

SIGNAL WORDS

Note the use of the signal words

DANGER, WARNING

, and

CAUTION

with the safety

messages. The appropriate signal word for each message has been selected using the
following guidelines:

DANGER

- An immediate and specific hazard, which WILL result in severe personal injury or

death if the proper precautions are not taken.

WARNING

- A specific hazard or unsafe practice, which COULD result in severe personal

injury or death if proper precautions are not taken.

CAUTION

- Unsafe practices which COULD result in personal injury if proper practices are

not taken, or as a reminder of good safety practices.

«
...
6
7
8
9
10
...
»

Содержание 3700S









































Отзывы:

Нет отзывов