Hillco 3700S Скачать руководство пользователя страница 24

Страница: 24 / 40

Header Tilt Cal Screens (Hillside and Sidehill Combines) (continued)

F. TILT CW CALIBRATION VALUE

K. TILT CCW CALIBRATION VALUE

G. HEADER NOT TILTING CW – UP

L. HEADER NOT TILTING CCW – UP

H. HEADER TILTING CW – ENTER

M. HEADER TILTING CCW – ENTER

NOTE:

The feeder and header if attached will automatically tilt during calibration.

1. Tilt CW Calibration Value (F) initially shows the previous cal. The range is 0 to 20. If the tilt CW has not

been calibrated, the default is 8.

2. To start the calibration, press the Up key (3) as shown in (G). The Tilt CW Calibration Value (F) will

change from the previous cal value to “0”.

NOTE: The Enter key (2) will be ignored until the Up key (3) has been actuated at least once.

3. If the feeder reel is not tilting CW, press the Up key (3) to increment the Tilt CW Calibration Value (F).

4. When the feeder starts to tilt CW, press the Enter key (2) as shown in (H) to display the Header Tilt

CCW Cal screen (J).

5. Tilt CCW Calibration Value (K) initially shows the previous cal. The range is 0 to 20. If the tilt CCW has

not been calibrated, the default is 8.

6. To start the calibration, press the Up key (3) as shown in (L). The Tilt CCW Calibration Value (K) will

change from the previous cal value to “0”.

NOTE: The Enter key (2) will be ignored until the Up key (3) has been actuated at least once.

7. If the feeder reel is not tilting CCW, press the Up key (3) to increment the Tilt CCW Calibration Value (K).

8. When the feeder starts to tilt CCW, press the Enter key (2) as shown in (M). This completes the

calibration and the screen will return to Cal Menu Screen 1.

9. If the Cancel key (4) is pressed at any time, the feeder tilt system stops any feeder tilt movement and

exits calibration. The operator stop abort screen A000 will be displayed. If the Up key (3) is pressed
when the Tilt CW or Tilt CCW Calibration Value (C) is 20, the operator stop abort screen A000 will also
be displayed.

Содержание 3700S









































Результаты поиска

Содержание 3700S

Отзывы:

Hillco 3700S, Руководство оператора, Страница: 24 / 40

Результаты поиска

Содержание 3700S

Отзывы: