Hillco 3700S Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 40

Hillco 3700S Скачать руководство пользователя страница 10

10

HIGHWAY

OPERATION

AND

TRANSPORT

SAFETY

1. Check with local authorities regarding combine transport on public roads. Obey all

applicable regulations and laws.

2. Check clearance elevations and widths of combine for travel near power lines, bridges,

trees, etc.

3. Make sure the Auto/Off/Manual leveling toggle switch is in the “Off” position for all

transport and highway travel situations.

4. Always travel at a safe speed. Use caution when making corners or meeting traffic.

SAFETY

LABELS

Familiarize yourself with the location of all safety labels. Read them carefully to understand
the safe operation of your machine.

“Read Operator’s Manual” Symbol

Decals, which display the “Read Operator’s Manual” symbol, are
intended to direct the operator to the Operator’s Manual for
further information regarding maintenance, adjustments and/or
procedures for particular areas of the leveling system. When a
decal displays this symbol refer to the Operator’s Manual for
further instructions.

T

O APPLY NEW OR REPLACEMENT LABELS

:

1.  Make sure the label area is smooth by removing any debris such as dirt or old labels.
2.  Wash the area with soap and water and then dry it thoroughly.
3.  After the area has completely dried, peal the backing off the safety label and place it onto

the cleaned area.

4. Make sure all areas of the label have adhered to the machine by pressing down on the

entire face of the label, including the corners.

«
...
8
9
10
11
12
...
»

Содержание 3700S









































Отзывы:

Нет отзывов