Hillco 3700S, Руководство оператора, Страница: 17 / 40

17
LEVELING ZERO POINT ADJUSTMENT
From the Operator Adjustments Screen, Push the
UP or DN buttons to move the X to the
Level Zero Point and push ENT . Note: Pushing the ESC button will take you back to the
Menu Screen.
Once in the Level Zero Point Screen place a level on the cab floor. Manually level the
combine to the left (
L ) or right ( R ) until the bubble shows level. Push and hold the ENT
button for 1 second. This will set the Zero Point for Leveling. This is a one (1) time
adjustment unless the clinometer or controller has been replaced. When done push the
ESC
button to leave the page. Note: Pushing the ESC button will take you back to the Menu
Screen.
Push the UP or DN
buttons to Move the
X to the desired
Selection and then
push ENT