Hill-Rom TotalCare P1830A, Руководство по обслуживанию, Страница: 76 / 92

6.1 Truck Ramp Accessory
Chapter 6: General Procedures
Page 6 - 4 TotalCare® Bariatric Bed Service Manual (man299ra)
6.1 Truck Ramp Accessory
Tools required: None
1. Insert the lug (A) on the truck ramp accessory (B) into the hole in the
support tube (C) (see figure 6-1 on page 6-4).
Figure 6-1. Truck Ramp
2. Rotate the truck ramp accessory (B) toward the bed, so the tang (D) is on
top of the plate (E).
3. Push in on the spring end (G) of the truck ramp accessory (B).
4. Lift up on the truck ramp accessory (B), so the hook (H) is inserted into the
hole (I) on the bottom of the IntelliDrive® Transport System drive box (F).
5. Release the spring end (G) of the truck ramp accessory (B) so the hook (H)
engages the hole (I) on the bottom of the IntelliDrive® Transport System
drive box (F).
6. Repeat steps 1 through 5 for the other side.