Hill-Rom Excel Care Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 60

Hill-Rom Excel Care Скачать руководство пользователя страница 35

Cleaning

WARNING:

Follow the product manufacturer’s instructions. Failure to do so could result in
personal injury or equipment damage.

SHOCK HAZARD:

SHOCK HAZARD:

SHOCK HAZARD:

The potential for electrical shock exists with electrical equipment. Failure to follow
facility protocols may result in death or serious personal injury.

Before cleaning any portion of the bed, unplug the unit from its power source.
Failure to do so could result in personal injury or equipment damage.

Do not expose the unit to excessive moisture. Personal injury or equipment
damage could occur.

CAUTION:

Do not use harsh cleansers, solvents, or detergents. Equipment damage could
occur.

General Cleaning

We recommend that you clean the unit with detergent and warm water. Do not use
excessive liquid or harsh cleansers. Do not use a power washer to clean the bed.

Steam Cleaning

Do not use any steam cleaning device on the unit. Excessive moisture can damage
mechanisms in this unit.

Cleaning Hard to Clean Spots

To remove difficult spots or stains, we recommend that you use standard household
cleansers and a soft bristle brush. To loosen heavy, dried-on soil, you may first need to
saturate the spot.

Disinfecting

When there is visible soilage and also between patient use, we recommend that you
disinfect the unit using an intermediate level, EPA registered (US only) disinfectant.

Dilute and use the disinfectant as specified on the manufacturer's label.

34

«
...
33
34
35
36
37
...
»

Содержание Excel Care





























































Отзывы:

Нет отзывов