manualshive.com logo in svg

Hill-Rom Centrella Smart+, Руководство по продукции

Поделиться
Скачать
Hill-Rom Centrella Smart+ Скачать руководство пользователя страница 22

22

©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. 
205278 rev 2  13-SEP-2017  ENG – US

Stand Assist Feature

The Stand Assist control is accessed via the Patient pendant or from the GCI 
Touchscreen. One-button simultaneously levels legs to a flat position and 
raises the head-of-bed to position the patient to safely get out of the bed.
To activate, press and hold the Stand Assist control until the legs are flat and 
the head is at the desired angle.
If equipped with a Centrella™ MAX powered air surface, wait for the seat 
section to inflate to provide more support for the patient to get out of bed.
Finally, adjust the bed height until the patient’s feet are flat on the floor, and 
help the patient out of the bed.

Bed Flat Control

The one-button Bed Flat and Level control, located on the GCI touchscreen, 
returns the bed, head, knees and feet to the flat and level position from any 
position.
To activate, press and hold the Bed Flat and Level control until the system 
stops. You will hear a single beep when the bed is at its flat position.
NOTE: If any frame function is locked, the Bed Flat control will not operate, an 
audible alert will sound and a message will appear on the touchscreen.

FlexAfoot™ Feature

The FlexAfoot™ bed length adjustment is a powered control standard on all 
models. With the press of a button, the caregiver can adjust the foot section 
up to 12” to accommodate various patient heights and make patients more 
comfortable.
To lengthen, press and hold the Foot Longer control until foot section is at 
the desired length.
To shorten, press and hold the Foot Shorter control until the desired length 
is achieved.
NOTES:
•  Length adjustment can be stopped anywhere between the fully retracted 

(76” inner, 87” outer) and fully extended position (88” inner, 99” outer). 

•  The FlexAfoot™ feature is available on battery backup and can be used 

during transport to adjust to small spaces such as an elevator.

G R APH I C AL  C AR EG I V E R  I N T E R FACE  (G CI)®  TO U CHSCR E E N

Head Angle

32˚

<30˚

Limit

Stand

Assist

Head Angle

32˚

<30˚

Limit

Stand

Assist

Head Angle

32˚

<30˚

Limit

Stand

Assist

Содержание Centrella Smart+































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды