Hill-Rom Centrella Smart+ Скачать руководство пользователя страница 17

17

©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. 
205278 rev 2  13-SEP-2017  ENG – US

Patient Comfort Control (Optional Feature)

If equipped with a Centrella™ MAX powered air surface, Patient Comfort 
control can be used to personalize comfort from soft to firm using the 
plus or minus controls. This does not take the mattress out of therapeutic 
pressure redistribution.

TV & Lighting Controls

Some patient pendants also include controls for TV and lighting.

Patient Pendant Holder Locations

On each side, there are three places to store the patient pendant — 
on the inside or outside of the head siderails, and on the top of the 
intermediate siderail.
To store the patient pendant, align it above the holder, and slide it into 
place. During transport, always ensure the pendant is stored on the inside of 
the rail to get through doorways.
There are two ways to stow the patient pendant on the intermediate rail:
•  Snap it on side to side, or
•  Slide it down onto the holder angled toward the patient, with the cable on 

the inside of the rail. Do not go straight down, it will not attach this way.

To remove the patient pendant from any siderail, lift off the holder.
NOTE: The pendant can be completely removed or moved from one side of 
the bed to the other to meet patient needs. Unscrew the two thumb screws, 
pull the plug out. Move to the outlet on the opposite side of the bed and 
securely screw in.

Nurse Call Control (Optional Feature)

Nurse Call controls are located on the caregiver control panel, the patient 
control panel, patient pendant (optional) and Experience POD™ device 
(optional). When the Nurse Call control is activated, a signal is sent to 
the nurse’s station. Voice communication is provided through a speaker/
microphone on the inside of both head siderails.
To activate, press a nurse call control. When activated,
•  Yellow indicator, single beep & verbal safety prompt (optional): 

confirmation to patient that the nurse call has been sent

•  Green indicator: communication line with nurse’s station is open
NOTE: Nurse Call controls can never be turned off.

PAT I E N T- FO CUSE D  FE AT U R E S

Содержание Centrella Smart+































Отзывы: