Hill-Rom careselections Synergy Air Elite, Руководство пользователя

Страница: 12 / 22

6 Synergy® Air Elite Low Airloss Alternating Therapy System User Manual
(139122 REV 1)
WARNING:
Use the unit under the order of a physician only . Failure to do so
could cause patient injury or equipment damage.
WARNING:
When you use the unit, it may be necessary to change the
patient’s position from time to time. Failure to do so could cause
patient injury or equipment damage.
WARNING:
Only Hill-Rom-authorized persons should service the Synergy®
Air Elite Low Airloss Alternating Therapy System. Service by
unauthorized persons could cause personal injury or equipment
damage.
CAUTION:
Do not drop the control unit. Equipment damage could occur.
CAUTION:
Do not store the Synergy® Air Elite Low Airloss Alternating
Therapy System in direct sunlight or extreme cold conditions.
Equipment damage could occur.
Installation
1. Remove the existing mattress from the bed frame.
2. Turn the Synergy® Air Elite Low Airloss Alternating Therapy
System mattress so its air tubes are at the foot end of the bed.
3. Put the mattress on the bed frame.
4. Use the elastic straps to attach the mattress to the bed frame.
5. Hang the control unit on the footboard of the bed frame.
6. Attach the air tube connectors and exhaust connector to the left-
hand side of the control unit.
7. Examine the air hoses. Make sure the air hoses are not kinked under
the mattress.
8. Plug the unit into an applicable power source.