9
ASSEMBLY INSTRUCTIONS
Hardware Used
7
8
7. Attach reflector plate to reflector panels
using
Small Screw
and
Small Flat Washer
.
Secure loosely with cap nuts . Once properly
aligned, tighten all screws and the
preassembled bolts.
HH
x 9
Large Flat
Washer
8. Insert 3 Reflector Studs & 3 Flat Washers.
Tighten studs securely.
Support Heater.
Slide 3 Large Flat Washers over threaded end
of Studs.
Locate Reflector Assembly on 3 studs.
Install large flat washers on studs & securely
tighten wing nuts but do not over-tighten!
JJ
II
GG
Hardware Used
II
GG
JJ
x 3
x 3
x 3
Small Flat Washer
Small Screw
Cap Nut
KK
x 3
Wing Nut
LL
x 3
Reflector
Stud
