6
ASSEMBLY INSTRUCTIONS
1
2
1.To protect heater from strong wind, anchor
the base securely to the ground with screws.
Reverse the base, fix the ground fixer to the
base with bolts and washers like picture shows.
Firm the ground fixer with nuts.
Fix another two ground fixer with bolts and
nuts,and reverse the base.
2.Put lower post through the hole on the top
of base, attach lowerpost to base using four
large bolts. Fully tighten all of the screws.
G
F
CC
BB
AA
DD
EE
H
Hardware Used
AA
BB
x 6
Small Flat
Washer
Nut
x 6
CC
Small
Bolts
x 6
Hardware Used
DD
EE
x 4
Large Flange
Nut
x 4
Medium Bolt
