Network Multi-Sensor Panoramic Dome Camera
95
Chapter 10
Storage Settings
Before you start:
To configure record settings, please make sure that you have the network storage
device or local storage device configured.
10.1
Configuring Record Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. In this section, you can follow the instructions to configure the scheduled
recording. By default, the record files of scheduled recording are stored in the local
storage or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration
>
Storage
>
Schedule Settings > Record Schedule
.
Figure 10-1
Recording Schedule Interface
2.
Check the checkbox of
Enable
to enable scheduled recording.
3.
Click
Advanced
to set the camera record parameters.
Содержание UD00543B
Страница 69: ...Network Multi Sensor Panoramic Dome Camera 69 Note A reboot is required for the settings to take effect...
Страница 94: ...Network Multi Sensor Panoramic Dome Camera 94 Figure 9 9 Exception Settings 3 Click Save to save the settings...
Страница 108: ...Network Multi Sensor Panoramic Dome Camera 108 Figure A 1 2 Modify Network Parameters...
Страница 111: ...Network Multi Sensor Panoramic Dome Camera 111...