Network Multi-Sensor Panoramic Dome Camera
57
6.1.4
Configuring Port Settings
Purpose:
You can set the port No. of the camera, e.g., HTTP port, RTSP port and HTTPS port.
Steps:
1.
Enter the Port Settings interface,
Configuration >
Network > Basic Settings >
Port
Figure 6-7
Port Settings
2.
Set the
HTTP port, RTSP port, HTTPS port and server port of the camera.
HTTP Port
: The default port number is 80, and it can be changed to any port No.
which is not occupied.
RTSP Port:
The default port number is 554 and it can be changed to any port No.
ranges from 1 to 65535.
HTTPS Port:
The default port number is 443, and it can be changed to any port
No. which is not occupied.
Server Port:
The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
3.
Click
Save
to save the settings.
Note
:
A reboot is required for the settings to take effect.
6.1.5
Configure NAT (Network Address Translation) Settings
Purpose:
NAT interface allows you to configure the UPnP™ parameters.
Содержание UD00543B
Страница 69: ...Network Multi Sensor Panoramic Dome Camera 69 Note A reboot is required for the settings to take effect...
Страница 94: ...Network Multi Sensor Panoramic Dome Camera 94 Figure 9 9 Exception Settings 3 Click Save to save the settings...
Страница 108: ...Network Multi Sensor Panoramic Dome Camera 108 Figure A 1 2 Modify Network Parameters...
Страница 111: ...Network Multi Sensor Panoramic Dome Camera 111...