Network Multi-Sensor Panoramic Dome Camera
43
start importing configuration file.
Note
: You need to reboot the camera after importing configuration file.
Upgrading the System
Click
Browse
to select the local upgrade file and then click
Upgrade
to start
remote upgrade.
Note:
The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process. The camera reboots automatically after
upgrading.
5.3.2
Log
Purpose:
The operation, alarm, exception and information of the camera can be stored in log
files. You can also export the log files on your demand.
Before you start:
Please configure network storage for the camera or insert a memory card in the
camera.
Steps:
1.
Enter log searching interface:
Configuration
>
System
>
Maintenance
>
Log
.
Figure 5-13
Log Searching Interface
2.
Set the log search conditions to specify the search, including the Major Type,
Minor Type, Start Time and End Time.
3.
Click
Search
to search log files. The matched log files will be displayed on the
log list
interface.
Содержание UD00543B
Страница 69: ...Network Multi Sensor Panoramic Dome Camera 69 Note A reboot is required for the settings to take effect...
Страница 94: ...Network Multi Sensor Panoramic Dome Camera 94 Figure 9 9 Exception Settings 3 Click Save to save the settings...
Страница 108: ...Network Multi Sensor Panoramic Dome Camera 108 Figure A 1 2 Modify Network Parameters...
Страница 111: ...Network Multi Sensor Panoramic Dome Camera 111...