Network Multi-Sensor Panoramic Dome Camera
88
Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
each area for different day/night switch.
Figure 9-4
Expert Mode of Motion Detection
Day/Night Switch OFF
Steps:
1.
Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
2.
Select
OFF
for
Switch Day and
Night Settings
.
3.
Select the area by clicking the area No..
4.
Slide the cursor to adjust the sensitivity and proportion of object on the area for
the selected area.
5.
Set the arming schedule and linkage method as in the normal configuration mode.
6.
Click
Save
to save the settings.
Day/Night Auto-Switch
Steps:
1.
Draw the detection area as in the normal configuration mode. Up to 8 areas are
Содержание UD00543B
Страница 69: ...Network Multi Sensor Panoramic Dome Camera 69 Note A reboot is required for the settings to take effect...
Страница 94: ...Network Multi Sensor Panoramic Dome Camera 94 Figure 9 9 Exception Settings 3 Click Save to save the settings...
Страница 108: ...Network Multi Sensor Panoramic Dome Camera 108 Figure A 1 2 Modify Network Parameters...
Страница 111: ...Network Multi Sensor Panoramic Dome Camera 111...