Network Video Recorder User Manual
176
NUCLEUS
Click the
Custom
to configure the NUCLEUS settings.
Enter the employee No., shift No., and the terminal No. in the field. The matching
message sent from the POS device will be used as the valid POS data.
The NUCLEUS protocol must be used in the RS-232 connection communication.
Set the connection mode to
TCP Reception
,
UDP Reception
,
Multicas
t,
RS-232
,
USB-to-RS-
232
, or
Sniff
, and click
Parameters
to configure the parameters for each connection mode.
TCP Connection
When using TCP connection, the port must be set from 1 to 65535, and the port for each
POS machine must be unique.
Set the
Allowed Remote IP Address
of the device sending the POS message.
TCP Connection Settings
UDP Connection
When using UDP connection, the port must be set from 1 to 65535, and the port for
each POS machine must be unique.
Set the
Allowed Remote IP Address
of the device sending the POS message.
USB-to-RS-232 Connection
Configure the USB-to-RS-232 convertor port parameters, including the port serial number, baud
rate, data bit, stop bit, parity, and flow ctrl.
