User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
13
Configure the
LED CONTROL
to set the LED control mode. The LED control mode can be
AUTO
,
FAR
(far irradiation distance LEDs)
ON
,
M/F
(medium and far irradiation distance LEDs)
ON
,
MID
(medium irradiation distance LEDs)
ON
,
M/N
(medium and near irradiation distance LEDs)
ON
and
OFF
.
Fan parameter configuration
You can set the
FAN CONTROL
as
ON
or
OFF
.
EIS (Electronic Image Stabilization) configuration
You can set the
EIS FUNCTION
as
ON
or
OFF
; and set the
EIS LEVEL
as 0-3.
Note:
The selectable EIS levels vary depending on the camera models.
Preset direct focus
You can set the preset direct focus function
ON/OF
on
PRESET DFOCUS
submenu.
Protocol settings
You can set the
PROTOCOL
STATUS
SET
as
ON
or
OFF
, and set the
PROTOCOL
SET
as AUTO
MATCH, PELCP-P, PELCO-D, Private-code, etc.
RS-485 checksum setting
You can set the
485CHECK SET
as
ON
or
AUTO
for improving the controlling effect.
Power Off Memory
You can set the duration of
Power Off Memory
as
30s, 60s
or
180s
for power off memory.
Wiper Speed
When you need to turn on the wiper, refer to the following steps.
Steps:
1.
Move the cursor to
WIPER CONTROL
using the direction buttons and click
IRIS+
to enter.
2.
Click
IRIS+
to enable the function.
3.
Move the cursor to
WIPER SPEED
.
4.
Click
IRIS+
and up/down direction buttons to change the speed. The speed can be HIGH,
LOW and MEDIUM.
5.
Click
IRIS+
button to confirm.
3.3
Configuring Image Parameters
3.3.1
Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu: