User Manual of IR Smart Speed Dome
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
12
(3)
Click the up/down direction buttons to increase/decrease the value.
(4)
Click
IRIS+
button to confirm and exit.
Y - M - D 07 01 18
H - M - S 15 33 25
DONE: OPEN
QUIT: CLOSE
Figure 3-4
Set the System Time
Zero angle (initial position) configuration
Purpose:
You can define the initial position in the panning direction on the
ZERO ANGLE
submenu.
Steps:
1.
Move the cursor to
ZERO ANGLE
using the direction buttons and click
IRIS+
to enter.
2.
Click the left/right/up/down direction buttons to adjust the view angle.
3.
Click
IRIS+
button to confirm and exit.
IR LED Parameters
IR PARAMETER
IR SENSITIVITY LOW
N/M LED CURRNT 2
FAR LED CURRNT 2
REFERENCE HEIGHT(M) N/A
REFERENCE ZOOM N/A
LED CONTROL AUTO
BACK EXIT
Figure 3-5
IR Parameter
IR Sensitivity:
When the
LED CONTROL
mode is
AUTO
, the IR LEDs are turned on or off according to the
illumination of the scene. The
IR SENSITIVITY
is higher, the IR LEDs are turned on or off easier
when the illumination changes.
The
IR SENSITIVITY
can be set to
LOW
,
MEDIUM
or
HIGH
.
LED Current:
Configure the
N/M LED CURRENT
and
FAR LED CURRENT
to adjust the brightness of NEAR,
MEDIUM and FAR LEDs. The brightness value ranges from 1 to 10.
LED Control: