Network Bullet Camera
·
Quick Start Guide
17
17
6.
Route the cables of the camera. Connect the cables and power on
the camera to see if you can get an image on your monitoring
screen.
Note:
If you can’t get the image, check the power and network
connection before performing the next step.
7.
Secure the camera to the junction box with the screws.
8.
Adjust the view angle. Refer to Step 6 in
Section 2.2.1 Direct
Mounting
.
9.
Adjust zoom and focus (refer to
Section 2.3 Zoom and Focus
Adjustment
).
2.2.3
Mounting with a Gang Box
Before you start:
The gang box is not included in the package. You need to prepare
one for this mounting type.
Steps:
1.
Secure the camera attachment to a gang box with the screws.
2.
(Optional) Install the water-proof jacket for network interface.
Refer to
Section2.4 Installation of Network Cable Water-proof
Jacket (Optional)
for detailed installation procedures.
3.
Route the cables of the camera.
4.
Connect the cables and power on the camera to see if you can get
an image on your monitoring screen.
Note:
Содержание IPC-B220-IZ
Страница 1: ...0 Network Bullet Camera Quick Start Guide ...
Страница 39: ...0 ...
