Network Bullet Camera
·
Quick Start Guide
16
16
2.2.2
Mounting with a Junction Box
Before you start:
The junction box is not included in the package. You need to prepare
one for this mounting type.
Junction Box
Safety Rope
Figure 2-8
Mounting with a Junction Box
Steps:
1.
Attach the drill template (supplied) to the wall where the camera
is to be mounted and drill holes in the wall according to hole 2 on
the drill template. See Figure 2-5.
2.
If you need to route cables through the wall (or the ceiling), cut a
cable hole according to the drill template. Skip this step if you
want to route the cables on the surface of the wall (or the ceiling).
3.
Secure the junction box to the wall (or the ceiling) with the
expansion screws.
4.
Hook the camera to the junction box with the safety rope.
5.
(Optional) Install the water-proof jacket for network interface.
Refer to
Section2.4 Installation of Network Cable Water-proof
Jacket (Optional)
for detailed installation procedures.
Содержание IPC-B220-IZ
Страница 1: ...0 Network Bullet Camera Quick Start Guide ...
Страница 39: ...0 ...
