HIKVISION DS-TCP045, Руководство пользователя

Страница: 15 / 93

14
Chapter 4 Network Connection
Before you start:

If you want to set the parking camera via a LAN (Local Area Network),
please refer to
Section 4.1 Setting the Parking Camera over the LAN .

If you want to set the parking camera via a WAN (Wide Area Network),
please refer to
Section 4.2 Setting the Parking Camera over the WAN .
4.1 Setting the Parking Camera over the LAN
Purpose:
To view and configure the camera via a LAN, you need to connect the parking
camera in the same subnet with your computer, and install the SADP or
iVMS-4200 software to search and change the IP address of the parking camera.
For the detailed introduction of SADP, please refer to Appendix 1.
4.1.1 Wiring over the LAN
The following figures show the two ways of cable connection of a parking
camera and a computer:

To test the parking camera, you can directly connect the parking camera to
the computer with a network cable as shown in Figure 4-1.

Refer to the Figure 4-2 to set parking camera over the LAN via a switch or
a router.
Parking Camera
PC
Network Cable
Figure 4-1 Direct Connection
Parking Camera
Switch or Router
PC
Network Cable Network Cable
Figure 4-2 Connection via a Switch or a Router