User Manual of Parking Camera
74
Up to 8 NAS disks can be connected to the camera.
To initialize and use the SD card after insert it to the camera, please refer to the
steps of NAS disk initialization.
11.2
Configuring Recording Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. In this section, you can follow the instructions to configure the scheduled
recording. By default, the record files of scheduled recording are stored in the SD card
(if supported) or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
Figure 11-5
Recording Schedule Interface
2.
Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3.
Set the record parameters of the camera.
Figure 11-6
Record Parameters
Pre-record
: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
Содержание DS-TCP045
Страница 1: ...0 User Manual UD06243B Parking Camera...
Страница 93: ...92...
