DS-PRI120 Security Radar User Manual
UM DS-PRI120 091720NA
48
Figure 8-2 Notification Push
2.
Enable the target notification.
•
Alarm Event Notification:
Device will push notifications when zone alarm is triggered or restored.
•
System Status Notification:
Device will push notifications when any status in the system is changed.
•
Operation Event Notification:
The device will push notifications when the user operate the device.
3.
Click
Save
.
8.3
Set Zone
1.
Select the radar and click
in the client software, or enter the radar IP address in the address bar of the
Web browser. Click
Alarm Module Parameters
→ Zone
to enter the page.
Figure 8-3 Set Zone
2.
Select a zone, and click
to edit the zone name and zone type.
3.
Click
OK
to complete.
8.4
Set Alarm Output
1.
Select the radar and click
in the client software, or enter the radar IP address in the address bar of the
Web browser. Click
Alarm Module Parameters
→
Relay
to enter the page.
