LCD Monitor User Manual
26
Figure 3. 29
Matrix List
3.
Matrix Parameters Configuration
You can modify the matrix parameters on the
Matrix Parameters
panel.
Steps:
1)
Select a loop mode for the matrix. If the mode is selected as
YES
, the control signal is transmitted to the
matrix through the monitor.
2)
Set the
Serial Port
mode as
Open
to enable the connection.
3)
Select the appropriate serial port number, baud rate, data bit, stop bit and parity.
4)
Select a matrix type and a protocol for the matrix, and enter input/output number into the corresponding
textbox.
5)
Click
Save
to save the settings.
Figure 3. 30
Matrix Settings
4.
Custom Matrix
Purpose:
When using the third-party matrix, you should choose custom matrix to perform the corresponding operation.
Otherwise the matrix is unable to work normally. Custom matrix settings can be done on matrix settings
interface.
