HIKVISION DS-D2046NL-C Скачать руководство пользователя страница 2

Страница: 2 / 46

LCD Monitor User Manual

About this Manual

This Manual is applicable to LCD Monitor (V1.4).

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other

information hereinafter are for description and explanation only. The information contained in the Manual is subject

to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company

website

Please use this user manual under the guidance of professionals.

Legal Disclaimer

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE

WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER

ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS

PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE

LATER PREVAILS.

Содержание DS-D2046NL-C















































Результаты поиска

Содержание DS-D2046NL-C

Отзывы:

Похожие инструкции для DS-D2046NL-C

Бренды по названию

Популярные бренды

HIKVISION DS-D2046NL-C, Руководство пользователя

Результаты поиска

Содержание DS-D2046NL-C

Отзывы:

Похожие инструкции для DS-D2046NL-C

Бренды по названию

Популярные бренды