LCD Monitor User Manual
9
2.3
Power Connection
Plug the female end of the power cable to the power interface on the rear panel of the LCD monitor. Plug the other
end of the cable to a power outlet (220 V AC, 50/60Hz) with a good grounding capability.
Power Specification
：
100 to 240 V AC, 50/60Hz.
Turn off the main power switch of the monitor, and pull the plug from the power outlet if the LCD monitor is
used for a long time.
Never connect the device to a DC power
Figure 2. 4
Power Interface
2.4
System Connection
Correct connection method helps you to better control and properly display the video on the video wall.
A video wall with 2 × 2 layout mode is taken as an example to describe the connection as follows.
Figure 2. 5
Video Wall Layout
The system connection is divided into two phases: the control signal connections and the video signal connections.
The Control Signal Connection
The cables need to be connected ordinally in accordance with the order of the screen numbers. The screen numbers
are generally sorted row-by-row or column-by-column.
And you have to set the virtual and physical screen linkage in the
Link Screen
interface. See
Chapter 3.5.4
Follow the wiring method shown in the figure below to compelete the connnection.
