Video Wall Controller • User Manual
11
Click Browse, select the correction file to Upload.
(Optional) If you need to back up the correction file, click Export, and select the download path to
export the correction file.
Configure the Receiving Card
It is used to configure the display parameters of the receiving card. Please contact technical
personnel for configuration.
Enter Video Wall Configuration
→
Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select
Advanced Configuration. Click Receiving Card Configuration.
Basic Parameters: View the basic information of the receiving card.
Gamma Table and Extended Attributes: It is used to adjust the display effect and image
enhancement parameters of the receiving card. Please contact our company’s technical
professionals for configuration.
Configure Advanced Image
It is used to improve the display effect of the screen by setting the gray level and gray brightness
level.
Enter Video Wall Configuration
→
Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select
Advanced Configuration. Click Advanced Image Configuration.
Advanced Image Configuration
Adjust image parameters.
Gray Level: It refers to the number of colors that can be displayed on the screen. The more
colors, the finer the picture.
Gray Brightness Level: It means the brightness of the corresponding gray level.
Click Save.
It is used to superimpose a virtual LED display frame on the video wall to display information.
Enter Video Wall Configuration
→
Virtual LED.