HIKVISION DS-8000HMFI Series, Руководство пользователя

Страница: 82 / 104

User Manual of DS-8000HMFI Mobile DVR
Page
82
Total
104
6.7 Vehicle info
It is used for recording the status of the bus, such as stop, warning, turn left, turn right, reverse,
backdoor and so on.
Here, the status are triggered by the high voltage or low voltage, it is according to the bus.
“Speed limit” means after the bus esceed the speed that sat already, it will trigger something.,
please refer to the section “Exception”.
Speed adjust:
“Traveling Distance” means the test distance that used for adjust speed.
“Pulse Num per second” means the number of pulse of every cycle of wheel. This parameters
related to bus.
After set the “traveling distance” and “Pulse Num per second” click “start speed adjust”, when
the bus reach the terminal, click “stop the speed adjust”. The speed quotiety will display here.
Notice: if the “Pulse Num per second” is zero or DVR do not get the pulse, the system will
popup “speed adjust failed”.
6.8 View Log
After enter into the “LOG” menu, you can check the log and use the USB flash, USB HDD
and SATA HDD to export the log file.
To view the log recorded in DVR HDD.
In “Utilities” menu, press “View Log” to enter into “Log” menu: