HIKVISION DS-7600NI-I2 Series Скачать руководство пользователя страница 117

Страница: 117 / 324

Network Video Recorder User Manual

116

Step 5

Protect the record files.

Find the record files you want to protect, and then click the

icon which will turn to

, indicating

that the file is locked.

The record files of which the recording is still not completed cannot be locked.

Click

to change it to to unlock the file and the file is not protected.

Figure 5-33

Unlocking Attention

5.10.2 Setting HDD Property to Read-only

Step 1

Enter HDD setting interface.

Menu> HDD

Figure 5-34

HDD General

Step 2

Click

to edit the HDD you want to protect.

Figure 5-35

HDD General- Editing

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter

Managing HDD Group.

Step 3

Set the HDD property to Read-only.

Содержание DS-7600NI-I2 Series





































































































































































































































































































































Результаты поиска

Содержание DS-7600NI-I2 Series

Отзывы:

HIKVISION DS-7600NI-I2 Series, Руководство пользователя, Страница: 117 / 324

Результаты поиска

Содержание DS-7600NI-I2 Series

Отзывы: