HIKVISION DS-7600NI-I2 Series Скачать руководство пользователя страница 115

Страница: 115 / 324

Network Video Recorder User Manual

114

5.10 Files Protection

Purpose:

You can lock the recording files or set the HDD property to Read-only to protect the record files
from being overwritten.

5.10.1 Locking the Recording Files



Lock File when Playback

Step 1

Enter Playback interface.

Menu> Playback

Step 2

Check the checkbox of channel(s) in the channel list and then double-click to select a date on
the calendar.

Figure 5-29

Normal/Smart Playback

Step 3

During playback, click the

button to lock the current recording file.

In the multi-channel playback mde, clicking the

button will lock all the record files related to

the playback channels.

Step 4

You can click the

button to pop up the file management interface. Click the

Locked File

tab to check and export the locked files.

Содержание DS-7600NI-I2 Series





































































































































































































































































































































Результаты поиска

Содержание DS-7600NI-I2 Series

Отзывы:

HIKVISION DS-7600NI-I2 Series, Руководство пользователя, Страница: 115 / 324

Результаты поиска

Содержание DS-7600NI-I2 Series

Отзывы: