HIKVISION DS-7208HUHI-K1S, Руководство пользователя

Страница: 95 / 302

Digital Video Recorder User Manual
94
Video Quality : Set the video quality of recording, with 6 levels configurable.
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the Main
Stream (Event) of the IP Camera.
Frame Rate : Set the frame rate of recording.
For DS-7200/7300/7600/8100/9000HUHI-F/N series, when 3 MP signal input is connected, the
frame rate of both the main stream and sub-stream cannot exceed 15 fps.
Max. Bitrate Mode : Set the mode to General or Custom.
Max Bitrate (Kbps) : Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended : A recommended max. bit rate range is provided for
reference.
Max. Average Bitrate (Kbps) : Set the max. average bit rate which refers to the average
amount of data transferred per unit of time.
Video Encoding : For 7300/8100/9000HUHI-F/N series, you can select H.264 or H.265 for the
IP camera.
When the connected IP camera does not support H.265, only H.264 can be seleted for the video
encoding.
Step 3 Check the checkbox of Enable H.264+ or Enable H.265+ to enable this function. Enabling it
helps to ensure the high video quality with a lowered bitrate.

If the connected IP camera supports H.265 and H.265 is enabled, Enable H.265+ is shown
on the interface instead of Enable H.264+ .

After enabling the H.264+ or H.265+, the Bitrate Type , Video Quality , Max. Bitrate Mode ,
Max. Bitrate(Kbps) and Max. Bitrate Range Recommend are not configurable.

The H.264+ or H.265+ cannot be used with the SVC at the same time.

For the connnected IP camera, the H.264+ or H.265+ should be supported by the camera
and added to the DVR with the HIKVISION protocol.

You should reboot the device to activate the new settings after enabling the H.264+ or
H.265+.
Step 4 Click More Settings to configure more parameters.