HIKVISION DS-7204HFI-ST, Руководство пользователя

Страница: 10 / 73

Hikvision EURO, Inc. DS-72xx Series Embedded Net DVR User Manual
10
The controls on the front panel include:
1. USB Ports: Universal Serial Bus (USB) ports for additional devices such as USB mouse and USB Hard Disk
Drive (HDD).
2. Status Indicators: Status indicators for different features of the DVR.
• Alarm:
Alarm indicator turns red when a sensor alarm is detected.
• Ready:
Ready indicator turns green when DVR is functioning properly.
• Status:
Status indicator turns green when DVR is controlled by an IR remote.
• HDD:
HDD indicator blinks red when data is being read from or written to HDD.
• Tx/Rx:
Tx/Rx indictor blinks blue when network connection is functioning properly.
3. Control Buttons:
• MENU:
(1) Enter numeral “1”; (2) Access the main menu interface.
• 2/ABC/F1:
(1) Enter numeral “2”; (2) Enter letters “ABC”; (3) [Zoom-] in PTZ control mode
• 3/DEF/F2: (1) Enter numeral “3”; (2) Enter letters “DEF”; (3) [Zoom+] in PTZ control mode
• 4GHI/ESC: (1) Enter numeral “4”; (2) Enter letters “GHI”; (3) Exit and back to the previous menu.
• 5JKL/EDIT: (1) Enter numeral “5”; (2) Enter letters “JKL”; (3) Delete characters before cursor; (4)Select the
checkbox and ON/OFF switch; (4) [Iris+] in PTZ control mode
• 6MNO/PLAY: (1) Enter numeral “6”; (2) Enter letters “MNO”; (3) Playback, for direct access to playback
interface.
• 7PQRS/REC: (1) Enter numeral “7”; (2) Enter letters “PQRS”; (3) Manual record, for direct access to manual
record interface; manually enable/disable record.
• 8TQV/PTZ: (1) Enter numeral “8”; (2) Enter letters “TQV”; (3) Access PTZ control interface;
(4) [Iris-] in PTZ control mode.
• 9WXYZ/PREV: (1) Enter numeral “9”; (2) Enter letters “WXYZ”; (3) Multi-camera display in preview; (4)
[Focus-] in PTZ control mode
• 0/A: (1) Enter numeral “0”; (2) switch between input methods (upper and lowercase alphabet, symbols and
numeric input); (3) [Focus+] in PTZ control mode
•
SHIFT: The SHIFT button is used for switch button action between numeric button and control button.
4. DIRECTION/ENTER Buttons:
• DIRECTION Buttons:
The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video. In
Preview mode, these buttons can be used to cycle through channels.
• ENTER Button:
The ENTER button is used to confirm selection in any of the menu modes. It can also be used
to tick checkbox fields. In Playback mode, it can be used to play or pause the video.
5. IR Receiver: Operation by IR remote control
6. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu. In the
Playback mode, the inner ring can be used to speed up/slow down the video. In Preview mode, it can be used to
cycle through different channels.
7. POWER Button: The POWER button is used for power on or power off the DVR.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text field before you’re
able to edit its content. After you’re done entering text, you must hit the ENTER button to be able to move on to the next field.