HIKVISION DS-7204HFI-ST, Руководство пользователя

Страница: 49 / 73

Hikvision EURO, Inc. DS-72xx Series Embedded Net DVR User Manual
49
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Managing User Accounts
By default, your DVR comes with two user accounts, the Administrator account and guest account. The
Administrator user name is admin and the password is 12345. The default password for Administrator should
be changed right away for security reasons. The Administrator has
the authority to add, delete or configure
parameters for many of the system functions..
Adding a New User
You may add up to 31 new users to your DVR. To add new users:
1. Enter the User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration > User
Settings.
Figure 38. User Settings Menu
2. Under Users List, click on guest or select this entry to add a new user.
3. Once a new entry has been selected, the fields under Users will become editable. Enter the information for
Name, Password and Verify.
4. In the Remote Permissions panel select the functions that you would like to give the user access to remotely.
You may also check the All checkbox to give full control to the selected remote user. These functions include:
• Log Search: View logs that are saved on the DVR.
• Serial Port Control: Configure settings for RS232 and RS485 ports.
• Two-Way Audio: Ability to use two-way radio between the remote client and the DVR.
• Advanced Control: Manage hard disk drives (initializing and setting properties for HDDs). Ability to remote
update system firmware and stop ping of the relay output.
• Live View: Access the Live Feed.
• PTZ Control: Control PTZ cameras.
• Configuration: Configure parameters, restore parameters to factory defaults and import settings to as well
as export settings from DVR.
• Video Output Control: Configure settings for video output.
• Alarm Control: Alert or control the relay output of the DVR. Alarm and exception settings must be
configured properly to upload to host.
• Shutdown/Reboot: Shutdown or reboot the DVR.
• Playback: Playback recordings remotely.
• All: Full permission to use all functions.
5. Click the Save button to save user settings and click Done to return to the previous menu.
Note: If you forget the password to your DVR, please contact your supplier.
Note: The guest permissions can be set in the Lock Menus menu (See Locking and Unlocking System Menus on
pages 68).