HIKVISION DS-7200-ST Series Скачать руководство пользователя страница 74

Страница: 74 / 119

User Manual of DS-7200-ST Series DVR

User may select the PTZ camera to link with the alarm input and then set the callup of preset,
patrol and pattern for alarm linked actions.

Click the

button to complete setup.

You may now add a schedule to start recording when an alarm is triggered (See

Scheduling a Recording

Alarm outputs may also be configured in the

Alarm Management

menu. To set up Alarm Output:

Select the

Alarm Output

tab. This will bring up the Alarm Output interface, shown in Figure 11.

Figure 11. Alarm Output Interface

Select the output you would like to configure and click the Set button. This will bring up the
settings page for the selected channel (Figure 12).

Figure 12. Alarm Output Settings

Configure the settings for selected output.

Select OK to save and exit.

Note:

If the

Hold For

option is selected as

Manually Stop

, the alarm will only stop when you manually stop it

(See

Triggering Alarm Outputs Manually

Manual Alarm Triggering

Note:

This section is invalid for DS-7200HVI-ST/SE, DS-7200HFI-ST/SE, DS-7200HVI-ST/SN and

DS-7200HFI-ST/SN models as they provide no alarm in/out.

You may also trigger alarm outputs manually through the Manual Alarm menu.

alarm shop

Содержание DS-7200-ST Series
























































































































Результаты поиска

Содержание DS-7200-ST Series

Отзывы:

HIKVISION DS-7200-ST Series, Руководство пользователя, Страница: 74 / 119

Результаты поиска

Содержание DS-7200-ST Series

Отзывы: