manualshive.com logo in svg

HIKVISION DS-7104NI-K1, Руководство пользователя

Поделиться
Скачать
HIKVISION DS-7104NI-K1 Скачать руководство пользователя страница 49

4. Set the continuous main stream/sub-stream recording parameters for the camera. Refer to

Configure Recording Parameter for details.

5. Go to Configuration → Record → Schedule .

6. Select recording type as Event. Refer to Edit Schedule for details.

Edit Schedule

Steps

1. Go to Configuration → Record → Schedule .

Figure 5-18 Recording Schedule

Continuous

Continuous recording.

Event

Recording is triggered by events.

2. Select a camera in Camera No..

3. Turn on Enable.

4. Configure the recording schedule.

Edit

Schedule

a. Click Edit.

b. Select a day to configure in Weekday.

c. To set an all-day recording schedule, check All Day and select schedule type.

d. To set other schedules, uncheck All Day, and set Start/End Time and

schedule type.

Note

Up to 8 periods can be configured for each day. And the time periods cannot

be overlapped with each other.

e. Click OK to save the settings and go back to upper level menu.

Network Video Recorder

36

Содержание DS-7104NI-K1



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды