manualshive.com logo in svg

HIKVISION DS-7104NI-K1, Руководство пользователя

Поделиться
Скачать
HIKVISION DS-7104NI-K1 Скачать руководство пользователя страница 36

●

Ensure the Wi-Fi camera is powered on, not activated, and has not been connected with other

devices via network cable.

●

In a kit, Wi-Fi camera will connect to the NVR automatically.

Configure Camera as Repeater

The connected Wi-Fi cameras can be set as repeaters to extend the wireless network connection

distance.
Before You Start

●

Ensure your Wi-Fi cameras support this function.

●

Before installing Wi-Fi cameras, you have to configure the repeater function first.

Steps

1. Add Wi-Fi cameras to the device through wireless network. Refer to Add Wi-Fi Camera for

details.

2. Go to Menu → Configuration → Camera → IP Camera .

Figure 5-7 Configure Camera as Repeater

3. Turn on the switch(s) in Auto Repeater of Wi-Fi camera(s) as your desire.

Note

●

The repeater camera and repeated camera shall both enable this function.

●

Only two layers are allowed for the topology.

4. Optional: Click Enable Repeater or Disable Repeater to enable or disable the repeater function

of all cameras.

Network Video Recorder

23

Содержание DS-7104NI-K1



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды