User Manual of DS-7000HI-S Series Net DVR
Page 25
Wiper control key:
[
WIPER/MENU
]
;
Light control key:
[
LIGHT/F1
]
;
Auxiliary device control key:
[
AUX/F2
]
Adjust preset description
In PTZ control mode, press
[
REC/SHOT
]
key, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressing
[
REC/SHOT
]
key, and
press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. V1.4
firmware can support 128 preset numbers at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, press
[
PLAY/AUTO
]
key to start PTZ auto function.
Press
[
PLAY/AUTO
]
key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter PTZ control mode again, and press
[
PLAY/AUTO
]
key to stop.
Exit PTZ contrl mode
Press
[
ESC
]
or
[
ENTER
]
to exit and return preview mode.