User Manual of Thermal Network Positioning system
© Hikvision
64
Task 2.
For two alarm rules of frame, you can set the alarm for region temperature
difference.
a)
Set the frame alarm rules.
b)
Click
to show the region temperature
difference alarm interface.
Figure 5-31
Region Temperature Difference Alarm
c)
Select two rules to compare the saved regions.
d)
Set the alarm rules and the temperature.
E.g., select Alarm Rule as Temperature Difference is Higher than, and enter
10 ° C, the device alarms when the difference between the minimum
temperature and the maximum temperature of the region is higher than 10 ° C.
Temperature Difference Alarm only applies to the targets set by frame.
3.
Set Alarm Linkage: Click Alarm Linkage to enter the alarm linkage interface and set the
linkage methods.
Refer to Step 3 in Section 5.2.1 Configuring Motion Detection
. In the
field of Other Linkage, you can check the checkbox to enable the alarm output (The
alarm output number varies depending on device ability).
4.
Click
to save the settings.
Содержание DS-2TD8166-180ZE2F-V2
Страница 1: ...Thermal Bi spectrum Network Positioning System User Manual UD05158B...
Страница 143: ......