HIKVISION DS-2TD8166-180ZE2F-V2, Руководство пользователя, Страница: 103 / 143

User Manual of Thermal Network Positioning system
© Hikvision
95
Configuration > PTZ > Basic Settings
Figure 7-26 Basic PTZ Configuration Interface
2. Configure the following settings:

Basic Parameters: Enable/disable PTZ control, proportional pan and preset freezing,
set the preset speed, keyboard control speed, and auto scan speed.
 PTZ Control: By default, PTZ Control function is enabled .You can uncheck the
checkbox to disable the PTZ control function.
The PTZ Control function varies depending on the models of positioning system.
 Proportional Pan: If you enable this function, the pan/tilt speeds change according
to the amount of zoom. When there is a large amount of zoom, the pan/tilt speed
will be slower for keeping the image from moving too fast on the live view image.
 Preset Freezing: This function enables the live view to switch directly from one
scene defined by a preset to another, without showing the middle areas between
these two, to ensure the surveillance efficiency. It can also reduce the use of
bandwidth in a digital network system.
Preset freezing function is invalid when you calling a pattern.
 Preset Speed: You can set the speed of a defined preset from 1 to 8.
 Manual Control Speed: The positioning system provides 5 control speed modes:
Compatible, Pedestrian, Non-motor Vehicle, Motor Vehicle and Auto. Select it from
the dropdown list.

Keyboard Control Speed: Define the speed of PTZ control by a keyboard as Low,
Medium or High.