HIKVISION DS-19A08-F/Kx, Руководство пользователя, Страница: 75 / 157

Control Panel User Manual
75

When you set the start and end time as non-zero, the start time
must be 5min greater than the end time of the previous time
bucket.

When you set the start and end time as non-zero, if the time bucket
is overlapped with the latter ones, or the difference between them
is less than 5min, all the settings of the latter ones will be cleared.
{12} Three types of Arming/Disarming.
Command Command
Description
Command Command
Description
Command Command
Description
A General
Arming/Dis
arming
B Real-time
Arming/Dis
arming
C Stay
Arming/Disa
rming
{13} End the command.
Enabling Trigger Schedule
To enable the trigger schedule, please refer to the command below.
697 0 #
1 2 3
{1} Enabling Trigger Schedule Command Address: 697.
{2} It indicates to enable/disable the trigger schedule.
Command Command
Description
Command Command
Description
0 Enable 1 Disable
{3} End the command.
Trigger Schedule Trigger Parameter Configuration
To configure the trigger parameters of the trigger schedule, please refer to the
command below.