HIKVISION DS-19A08-F/Kx, Руководство пользователя, Страница: 109 / 157

Control Panel User Manual
109
2. Check the checkbox to enable report uploading.
3. Enter the report-uploading period (unit: hour). The report-uploading period
represents the time interval between uploading the first report and the next
report.
4. Enter the first report uploading time interval (unit: minute). The first report
uploading time interval represents the time interval between enabling the
report uploading function and sending the first report.
5. Select a center type.
6. Enter the center name and phone number.

The maximum length of center name is 32 characters.

The phone number should be 31 characters and the input mode is

{No.}{Dwell Time}{EXT No.}. For example, in the number of
000088075998FFF8180, the letter F (which means 2 seconds)
represents the dwell time, if the number of the letter F is N, the dwell
time is N*F seconds. The number of F is suggested to be more than 3,
which means the dwell time should be more than 6 seconds.
7. Enter the dialing times (1~15). The dialing times represents the times that the
control panel trying to communicate the alarm receiving center.
8. Select the Pstn protocol.
9. Select the Pstn transmission mode: DTMF5/S and DTMF10/S.
10. Enter the receiver ID which is the authentication account while doing the
communication with the alarm receiving center.
11. Click Apply to save the settings.
Wireless Center Parameter Settings
Steps:
1. Enter the wireless center parameter settings page.
Remote Configuration -> Network -> Wireless Center