manualshive.com logo in svg

HIKVISION AX DS-PWA32-H, Руководство пользователя, Страница: 70 / 121

Поделиться
Скачать
HIKVISION AX DS-PWA32-H Скачать руководство пользователя страница 70

Note

Normally, the QR code is printed on the label stuck on the back cover of the control panel.

-

Tap   → Manual Adding to enter the Add Device page. Enter the device serial No. with the

Hik-Connect Domain adding type.

3. Tap   to search the device.

Figure 4-34 Results Page

4. Tap Add on the Results page.

5. Enter the verification code and tap OK.

6. After adding completed, enter the device alias and tap Save.

4.4.4 Add Peripheral to the Control Panel

It is required to enter the activation name and the password login the control panel after it being

added. The tampering alarm will not be detected within 5 minutes after you login the device as a

setter and does not operate the device.
Before You Start

Make sure the control panel is disarmed.
Steps

Note

Some control panel models do not support add zones or wireless devices remotely. You should add

them to the control panel directly. For details, see the user manual of the wireless device.

1. On the device list, tap the security control panel and then log in to the device (if required) to

enter the Partition page.

2. Tap   to enter the Scan QR Code page.

3. Scan the QR code of the peripheral.

AX Security Control Panel

61

Содержание AX DS-PWA32-H


























































































































Отзывы:

Нет отзывов