HIKVISION AX DS-PWA32-H Скачать руководство пользователя страница 66

Страница: 66 / 121

System Maintenance

You can reboot the device, restore default settings, import/export configuration file, or upgrade

the device remotely.
Select the device and click Remote Configuration in the client software, or enter the device IP

address in the address bar of the web browser. Click System → System Maintenance to enter the

Upgrade and Maintenance page.
Reboot

Click Reboot to reboot the device.

Restore Default Settings

Click Partly Restore to restore all parameters except for admin user information, wired network,

Wi-Fi network, detector information, and peripheral information to default ones.
Click Restore All to restore all parameters to the factory settings.

Import Configuration File

Click View to select configuration file from the PC and click Import Configuration File to import

configuration parameters to the device.

Export Parameters

Click Export Configuration File to export the device configuration parameters to the PC.

Upgrade File

Click View to select an upgrade file from the PC and click Upgrade to upgrade the device

remotely.

Note

• Do not power off when the device is upgrading.

• Only manufacturer can use this function.

Certificate Standard

Click System → System Maintenance → Certificate Standard to enter the certificate standard

settings page.
You can switch between EN Defaulted and General Standard mode.
The device applies EN Standard by default.

Note

When you select EN Defaulted, the user permission and arming parameters will conform to the EN

Standard.

AX Security Control Panel

Содержание AX DS-PWA32-H


























































































































Результаты поиска

Содержание AX DS-PWA32-H

Отзывы:

HIKVISION AX DS-PWA32-H, Руководство пользователя, Страница: 66 / 121

Результаты поиска

Содержание AX DS-PWA32-H

Отзывы: