HIKVISION AX DS-PWA32-H Скачать руководство пользователя страница 46

Страница: 46 / 121

4. Check the check box to enable the function of buzzer, presenting card, and arming/disarming

with keypad.

5. Check the Enable check box of Back-light Off Time, and set the duration of light off.

6. Select the keypad linked partition.

7. Optional: Enable Link to Wireless Keypad and set the serial No.

Note

The keypad in 868 MHZ may not support this function.

8. Set the Disconnectin Time, and the system determins connection fault if the disconnected

duration of the device is longer than the configured value.

9. Click OK.

Note

• After the keypad is configured, you can click Status → Keypad to view the keypad status.

• You can set the keypad password on the page of User Management → User → Operation .

Card Reader

You can set the parameters of the card reader that is enrolled to the control panel.
Steps

1. Click Device Management → Card Reader to enter the page.

Figure 4-18 Card Reader Settings

2. Click to enter the reader settings page.

3. Set the card reader name.

4. Enable Buzzer.

5. Select the keypad linked partition.

AX Security Control Panel

Содержание AX DS-PWA32-H


























































































































Результаты поиска

Содержание AX DS-PWA32-H

Отзывы:

HIKVISION AX DS-PWA32-H, Руководство пользователя, Страница: 46 / 121

Результаты поиска

Содержание AX DS-PWA32-H

Отзывы: