Fig1-2-3 Remote Control Panel Introduction
Menu:
Press the button 3 seconds, you will see the camera main menu;
Up:
Control the cursor upwards on the menu state; Control the camera upwards while exit the menu.
Down:
Control the cursor downwards on the menu state; Control the camera downwards while exit the
menu.
Left:
Control the camera move to the left;
Right:
Control the cursor move to the right;
On Guard:
Enable the “On Guard” function, and you can deploy the camera through the network.
Cancel Guard:
Cancel “On Guard” deployment, and you cannot set the “On Guard” through the network.
[Notice] When the Menu is Open, the above mentioned “Security” and “Withdraw” are separately
used as “IRIS+” and “IRIS-”. The function of “F1, F2, F3, F4 and
” is temporarily reserved. You
can control the camera rotation with the Remote Control. Once the direction button is pressed, the
camera will gyrate towards the orientation you select. It will not stop until you press the “Menu”
button.
1.2 State Indicate Lamp Introduction
Alarm
On Guard
Privacy Protect
State Indicate Lamp
× ×
×
Off
× ×
√
Green
On
6